
Solas DynaFly Series Impeller Yamaha FX High Output 2004-2008
Details
Dyna Fly-Maximum AccelerationSOLAS's new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation.
The impeller is capable of giving your PWC an incredible boost in its performance.
The SOLAS product line includes Dynafly impellers for the Kawasaki Ultra 150 pump and the SeaDoo 951 pump.
SOLAS also has developed new impellers for other pumps.
Applications
2004 FX High Output2005 FX High Output
2006 FX High Output
2007 FX High Output
2008 FX High Output
2004 FX Cruiser High Output
2005 FX Cruiser High Output
2006 FX Cruiser High Output
2007 FX Cruiser High Output
2008 FX Cruiser High Output
Installation
1.)Remove and separate the whole jet pump from the PWC2.)For YH Series impeller, remove the trail cone (or cap) from the stator. For all others, hold the front end of the drive shaft with a shaft holder (optional part) on bench vise.
3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench (optional part). Turning counter clockwise will loosen the impeller.
4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.
5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.
6.)Assemble the pump and refill O/E pump oil or grease to spec. (for YH series assemble the pump and put it back on the PWC)
*this installation guide is suggested for reference only
*please refer to your original service manual or contact your PWC dealer for detail
*guide provided by Solas
*some wrenches are optional parts and are available for purchase on our website
Impeller Series |
Wrench |
Holder |
Seal |
YA Super Camber (ABC/IJK Series) |
WR003 |
WR003H |
SL003 |
YB Super Camber (IJK Series) |
WR004 |
WR004H | SLA008 (18mm shaft) |
YD Super Camber Series (IJK Series) Xprop Series |
WR004 |
WR004H |
SLA008 |
YD Concord Series |
WR007 |
WR007H |
SLA009A |
YF Concord/Xprop Series |
WR007 |
WR007H |
SLA009 |
YG Dynafly Series |
WR007 |
WR007H |
SLA009 |
YS Dynafly Series |
WR014 |
WR014H |
SLA014 |
YS Concord Series |
WR014 |
WR014H |
SLA016 |
YH Concord Series (only for 2005-06 VX110 Sport and VX700 2006) |
WR001 |
 | SLA009 |
Details
Dyna Fly-Maximum AccelerationSOLAS's new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation.
The impeller is capable of giving your PWC an incredible boost in its performance.
The SOLAS product line includes Dynafly impellers for the Kawasaki Ultra 150 pump and the SeaDoo 951 pump.
SOLAS also has developed new impellers for other pumps.
Applications
2004 FX High Output2005 FX High Output
2006 FX High Output
2007 FX High Output
2008 FX High Output
2004 FX Cruiser High Output
2005 FX Cruiser High Output
2006 FX Cruiser High Output
2007 FX Cruiser High Output
2008 FX Cruiser High Output
Installation
1.)Remove and separate the whole jet pump from the PWC2.)For YH Series impeller, remove the trail cone (or cap) from the stator. For all others, hold the front end of the drive shaft with a shaft holder (optional part) on bench vise.
3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench (optional part). Turning counter clockwise will loosen the impeller.
4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.
5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.
6.)Assemble the pump and refill O/E pump oil or grease to spec. (for YH series assemble the pump and put it back on the PWC)
*this installation guide is suggested for reference only
*please refer to your original service manual or contact your PWC dealer for detail
*guide provided by Solas
*some wrenches are optional parts and are available for purchase on our website
Impeller Series |
Wrench |
Holder |
Seal |
YA Super Camber (ABC/IJK Series) |
WR003 |
WR003H |
SL003 |
YB Super Camber (IJK Series) |
WR004 |
WR004H | SLA008 (18mm shaft) |
YD Super Camber Series (IJK Series) Xprop Series |
WR004 |
WR004H |
SLA008 |
YD Concord Series |
WR007 |
WR007H |
SLA009A |
YF Concord/Xprop Series |
WR007 |
WR007H |
SLA009 |
YG Dynafly Series |
WR007 |
WR007H |
SLA009 |
YS Dynafly Series |
WR014 |
WR014H |
SLA014 |
YS Concord Series |
WR014 |
WR014H |
SLA016 |
YH Concord Series (only for 2005-06 VX110 Sport and VX700 2006) |
WR001 |
 | SLA009 |
Description
Details
Dyna Fly-Maximum AccelerationSOLAS's new impeller is designed to give high compression ratio pumps a stronger acceleration with less cavitation.
The impeller is capable of giving your PWC an incredible boost in its performance.
The SOLAS product line includes Dynafly impellers for the Kawasaki Ultra 150 pump and the SeaDoo 951 pump.
SOLAS also has developed new impellers for other pumps.
Applications
2004 FX High Output2005 FX High Output
2006 FX High Output
2007 FX High Output
2008 FX High Output
2004 FX Cruiser High Output
2005 FX Cruiser High Output
2006 FX Cruiser High Output
2007 FX Cruiser High Output
2008 FX Cruiser High Output
Installation
1.)Remove and separate the whole jet pump from the PWC2.)For YH Series impeller, remove the trail cone (or cap) from the stator. For all others, hold the front end of the drive shaft with a shaft holder (optional part) on bench vise.
3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench (optional part). Turning counter clockwise will loosen the impeller.
4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.
5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.
6.)Assemble the pump and refill O/E pump oil or grease to spec. (for YH series assemble the pump and put it back on the PWC)
*this installation guide is suggested for reference only
*please refer to your original service manual or contact your PWC dealer for detail
*guide provided by Solas
*some wrenches are optional parts and are available for purchase on our website
Impeller Series |
Wrench |
Holder |
Seal |
YA Super Camber (ABC/IJK Series) |
WR003 |
WR003H |
SL003 |
YB Super Camber (IJK Series) |
WR004 |
WR004H | SLA008 (18mm shaft) |
YD Super Camber Series (IJK Series) Xprop Series |
WR004 |
WR004H |
SLA008 |
YD Concord Series |
WR007 |
WR007H |
SLA009A |
YF Concord/Xprop Series |
WR007 |
WR007H |
SLA009 |
YG Dynafly Series |
WR007 |
WR007H |
SLA009 |
YS Dynafly Series |
WR014 |
WR014H |
SLA014 |
YS Concord Series |
WR014 |
WR014H |
SLA016 |
YH Concord Series (only for 2005-06 VX110 Sport and VX700 2006) |
WR001 |
 | SLA009 |



















